Splitting Wood Using a Maul

There are different uses of wood just as there are different types of trees. Trees are useful for firewood and others are used for carpentry to make various kinds of furniture. To put trees into a useful form, they need to be cut and sliced into different kinds of different sizes and shapes of woods. Different tools are used for cutting and shaping the wood one of them being the maul. Below is the procedure of cutting wood using a maul.

Step 1. Use a maul or splitting wedge to split hardwood.

A splitting maul is basically a thicker, more wedge-molded hatchet made for separating wood along the grain, with a limit sledge-pound edge on the back of the part sharp edge. These are regularly moderately heavier than a hatchet, usually by a few pounds, and the heaviness of the batter makes the occupation less demanding.

Step 2.Slice your wood to length.

Typical wood stoves and littler chimneys typically take a 15 to 25 inch (34 to 56 cm) log, shorter logs split more effortlessly it will part. You should slice your wood to the most proficient length for your motivation, as far as both dealing with and putting away it, and also making it a reasonable length for your application.

Step 3.Place your first sign on the chopping square.

Ensure it is steady, and close to the focal point of the piece, if conceivable.

Swinging an overwhelming hammer at a firm piece is to a significant degree hazardous. A looking blow could strike your leg, or send the wood taking off like a risky shot. Set yourself up for progress by putting the wood safely

Step 4.Look at the wood before part it.

Search for hairline breaks in the log. You should point so that the sharp edge of you the destroy keeps running a same way from the break.The various woods part in some ways, so designs in like manner. Oak parts to some degree effectively through the middle, the even substantial distance across divides. Maple, then again, is part more efficiently toward the edges of the end-grain.

Step 5. Pick the area you need to part the log, remain with your batter laying on this field, and set your feet square. You may tap a little space into the wood, so you'll have a decent visual signal at which to direct the maul if the grain isn't clear from where you're standing.

Step 6.Hold the maul immovably with your right hand toward the finish of the handle, and support the batter with your right hand, just underneath the handle of the maul. Flex your knees marginally, at that point lift the batter head straight up over your head, expanding your arms straight.

Slide your firm hand down until the point that both of your hands are close, holding the end of the handle, at that point move your hands down and flick your wrists, giving gravity a chance to do a significant part of the work for you.

Step 7. Repeat the last step six of swinging the maul up and down until the wood splits to your desired sizes.

 More details click here